http://REDWOPCHEMICAL.IN
REDWOPCHEMICALSPVTLTD 5835233f9ec66828dc461717 False 34977 30
OK
background image not found
Found results for
'strength'
EPMORTAR ER INR   0 INR  0
-NaN%

EPMORTAR ER

Resin jointing and repair compound Uses: For fast and emergency resin statement of concrete. For bedding, jointing, profiling of concrete, repair of damaged concrete in precast units, jointing between precast units, repair of stair treads, fixing tiles, cladding, repairs to kerbs, man hole covers, door and window frames etc. Advantages  Durable - Stronger than concrete. Highly chemical and oil resistant. Excellent bond strength.  Ease of application - Mix resin and hardener in any proportion as required. No primer is required.  Quick - Finish job operation in 2 - 3 hours.  Versatile - Can be poured, trowelled, filled with coarse aggregates. Will cure in dry, wet, damp, and under water conditions. Can be used at down to 00C or upto 600C.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
INJECTOFIL INR   0 INR  0
-NaN%

INJECTOFIL

Low viscous epoxy injection grout Uses: INJECTOFIL is used for injecting into cracks, honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps (<10mm). Advantages • Low viscosity - Can be injected into fine cavities and narrow gaps. • High mechanical strength - Performs even under heavy loads and stresses. • Excellent adhesive strength - Good bonding with substrate • Two part system - Easy to mix and handle • Non shrink - Complete filling of voids and cracks • Chemical resistant - Can be used in aggressive environments.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
TERATILE SILVER INR   0 INR  0
-NaN%

TERATILE SILVER

Ceramic tile adhesive suitable for exposure to damp and totally submerged conditions Uses: TERATILE SILVER a high quality adhesive for the permanent fixing of ceramic tiles for vertical and horizontal applications. It is also suitable for use in damp and totally submerged conditions, e.g. swimming pools. It can also be used for fixing of insulating and acoustic boards made of expanded polystyrene, etc. TERATILE SILVER tile adhesive is more suitable for internal applications. Advantages:  Non-shrink and waterproof  Can be used for areas subjected to totally submerged conditions and internal applications  Workable with open wet time of 20 mins. at 300C  Good slip resistance. High adhesive bond strength.  Early strength gain enables quick installation.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
BUTABOND SBR INR   0 INR  0
-NaN%

BUTABOND SBR

Mortar and Screed modifier cum bonding aid Uses: For modifying and improving bonding of floor toppings, renderings and mortars; repair of worn, damaged and spelled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonry and slurries. Advantages:  Simple to use - Single component, gauged as required.  High adhesion - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc.  Improves durability -Gives weather resistant mortar with improved impermeability to chlorides and other harmful agents.  Reduces permeability- Provides waterproof screeds, plasters and permeability slurries.  Increases strength - Improved tensile and flexural properties allow thin applications.  Versatile - Compatible with all common hydraulic cements.  Cost effective - BUTABOND SBR is economical to use

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
MICROCONE RGL INR   0 INR  0
-NaN%

MICROCONE RGL

Cost effective, General purpose, non-shrink, cementitious microconcrete Uses: For economical repairs to damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is difficult or impossible. Suitable for various structural strengthening measures such as filling honeycombs and cracks. Advantages:  Gaseous expansion system compensates for shrinkage and settlement in the plastic state.  Can be pumped or poured into restricted locations.  Highly fluid to allow for placement without vibration.  Pre-packed to overcome site-batched variations.  Low permeability  Economical  Contains no chloride admixture.  Ease of use

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
BLOCKFIX INR   0 INR  0
-NaN%

BLOCKFIX

Blockfix is a versatile thin jointing material for joining AAC blocks, fly ash bricks, concrete blocks etc.This mortar is specially designed to provide stronger, much more durable bonding between the blocks with superior adhesive strength. It replaces conventional cement and sand mix mortar. FEATURES • Blockfix is made from a unique combination of cement, graded sand and proprietary additives. • The unique chemical combination enables this mortar to be more compact, thinner and stronger. • At only 3 mm thick, it is far thinner than the conventional mortar which is between 12-18 mm. • Being pre-mixed it is easy to use and also ensures the compaction of interlocking bricks making the bonds tougher and more durable.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
ANCHOSINE P FIX INR   0 INR  0
-NaN%

ANCHOSINE P FIX

Design criteria: The version of ANCHOSINE P FIX grout to be used will depend upon ambient temperature and anchor conditions. The high strength of the cured resin permits strong anchors to be created. The ultimate bond strength developed depends upon: • Strength of host material • Length of resin bond to bar • Hole preparation and formation • Type and dimension of bar

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Industrial Engg. Grout ARACONE GP2 INR   0 INR  0
-NaN%

Industrial Engg. Grout ARACONE GP2

ARACONE GP2 Advantages: Gaseous expansion system compensates for shrinkage and settlement in the plastic state No metallic iron content to cause staining. Pre-packed material overcomes onsite batching variations Develops high early strength without the use of chlorides High ultimate strength ensure the durability of the hardened grout Free flow ensures high level of contact with load bearing area

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false