http://REDWOPCHEMICAL.IN
REDWOPCHEMICALSPVTLTD 5835233f9ec66828dc461717 False 34908 30
OK
background image not found
Found results for
'chemical attack'
MAZIK COAT INR   0 INR  0
-NaN%

MAZIK COAT

MAZIK COAT system comprises of a single part water based acrylic emulsion sealer coat cum primer coat and a single part aliphatic acrylate, water based top coat. It gives resistance to aggressive agents, cracks, UV rays and rain, MAZIK COAT system is supplied in ready to use packs and available in a range of colours Uses MAZIK COAT system is suitable for use on all types of Structures which are directly exposed to sea, and to protect structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The products is also suitable to protect other cementitious substrates and masonry. Benefits - Protects exposed reinforced concrete structures from atmospheric gases-excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water - It resists efflorescence and lime blooming with good adhesion on all cement plasters. It hides surface undulations and fine surface cracks. - UV resistant- aliphatic acrylate gives resistance to long term weathering. - It contains special glass fibers to maintain anti cracking properties.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
EPMORTAR ER INR   0 INR  0
-NaN%

EPMORTAR ER

Resin jointing and repair compound Uses: For fast and emergency resin statement of concrete. For bedding, jointing, profiling of concrete, repair of damaged concrete in precast units, jointing between precast units, repair of stair treads, fixing tiles, cladding, repairs to kerbs, man hole covers, door and window frames etc. Advantages  Durable - Stronger than concrete. Highly chemical and oil resistant. Excellent bond strength.  Ease of application - Mix resin and hardener in any proportion as required. No primer is required.  Quick - Finish job operation in 2 - 3 hours.  Versatile - Can be poured, trowelled, filled with coarse aggregates. Will cure in dry, wet, damp, and under water conditions. Can be used at down to 00C or upto 600C.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
POLYCOTE CWP INR   0 INR  0
-NaN%

POLYCOTE CWP

Crystalline capillary waterproofing system for cementitious substrates Uses Polycote CWP crystalline waterproofing system is used for waterproofing against the positive or negative sides of hydrostatic heads of water, for damp proofing, repairing cracks, plugging holes, sealing wall - floor joints and stopping active leaks in a wide variety of conditions including:  Sewage treatment and water treatment plants, tanks,foundations, tunnels and manholes.  Terrace garden, balconies, sunshades etc.  Roof and Sunken slabs  Industrial and office buildings  Reservoirs, water holding structures etc. Advantages  Meets the requirements as per ANSI/NSF Std61 forsuitability to potable water  Penetrates concrete, seals capillary tracts  Contains no chloride  Easy to apply  Resists chemical attack of sewage and industrial wastes  Suitable for external and internal applications.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
INJECTOFIL INR   0 INR  0
-NaN%

INJECTOFIL

Low viscous epoxy injection grout Uses: INJECTOFIL is used for injecting into cracks, honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps (<10mm). Advantages • Low viscosity - Can be injected into fine cavities and narrow gaps. • High mechanical strength - Performs even under heavy loads and stresses. • Excellent adhesive strength - Good bonding with substrate • Two part system - Easy to mix and handle • Non shrink - Complete filling of voids and cracks • Chemical resistant - Can be used in aggressive environments.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
BLOCKFIX INR   0 INR  0
-NaN%

BLOCKFIX

Blockfix is a versatile thin jointing material for joining AAC blocks, fly ash bricks, concrete blocks etc.This mortar is specially designed to provide stronger, much more durable bonding between the blocks with superior adhesive strength. It replaces conventional cement and sand mix mortar. FEATURES • Blockfix is made from a unique combination of cement, graded sand and proprietary additives. • The unique chemical combination enables this mortar to be more compact, thinner and stronger. • At only 3 mm thick, it is far thinner than the conventional mortar which is between 12-18 mm. • Being pre-mixed it is easy to use and also ensures the compaction of interlocking bricks making the bonds tougher and more durable.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
EPFLOOR MM2 INR   0 INR  0
-NaN%

EPFLOOR MM2

2mm thick epoxy resin based floor topping Uses EPFLOOR MM2 is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. It provides a dense, impervious, colored and chemically resistant floor surface which is hygienic and easy to clean. Typical applications include: • Clean rooms • Laboratories • Kitchens • Plant rooms • Light industrial plants Advantages • Fast application - minimizes downtime • Chemically resistant - good resistance to a wide range of chemicals • Durable - good abrasion resistance • Hygienic - provide a dense, impervious, seamless floor surface which is easily cleaned • Attractive - available in a wide range of colors to enhance the working environment

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
BITUCOTE M1M INR   0 INR  0
-NaN%

BITUCOTE M1M

Bituminous protective compounds Uses BITUCOTE M1M is designed to provide a continuous waterproof barrier. Used in conjunction with BITUCOTE, BITUCOTE M1M will provide a dry film thickness complying with BS 8102 for concrete protection and waterproofing. BITUCOTE M1M can be used for repairs to felt/asphalt roofs. Advantages • Asbestos free • Single component • Easily and inexpensively applied • Resistant to most naturally occurring chemicals • Odorless and taint free when dry • Excellent flexibility • Used for over 30 years in a wide range of environments • Excellent adhesion to most common building substrates

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
EPCOTE ET 140 INR   0 INR  0
-NaN%

EPCOTE ET 140

Epoxy coaltar based coating for steel and concrete surfaces Uses: Provides protection to concrete and metal structures against corrosion from aggressive environments. Suitable for tanks above ground or in totally submerged conditions such as pipelines. Particularly useful in sewage works, effluent plants and dock and harbour installations. Advantages: Excellent resistance to all types of water Easily applied by brush or spray Easily applied by brush or spray Provides long term corrosion protection No priming necessary in most cases Chemical and abrasion resistant Economic and versatile product Descriptions: EPCOTE ET140 coating is based on solvented coal tar epoxy resins specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false